Thomasville Messina 523122 Instrucciones De Armado página 4

Page 4 of 4
Assembly Instructions
3. Align the holes in the "U" bar, located underneath the seat frame (A-1), with the holes in the metal spring plates of the front
spring rail (D-1) of chair frame-1. Attach the seat frame (A-1) using the screws (G), metal plates (I), spring washers (H), and
nuts (J) as indicated. When attaching the seat frame, insert and start all four screws before completely tightening. Once all
four screws have been inserted, tighten each nut (J) and screw (G) using the hex wrench-1 (Q) and hex wrench-2 (R). After
securely tightening each of the screws, install the PVC hex head screw covers (O). See Figure 4.
Repeat Step 3 for the remaining three dining chairs using seat frames A-2, A-3, & A-4 in the corresponding chair frames.
Figure 4
4. Place the seat cushions (T) and back cushions (U) on each of the chairs as indicated in Figure 1 on Page 1. Secure the seat
cushions to the chair frames using the attached straps with hook & loop fasteners. Note: The straps are not centered top to
bottom on the seat cushions, but instead sewn in the bottom half of the seat cushions. Place the seat cushions on the seat frames
with the straps towards the bottom.
TM
Messina Concealed Motion Dining Chair
! KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE !
Model #: 523122
Model #: 523127