Descargar Imprimir esta página

SEI FA1009659 Manual De La Asamblea página 37

Publicidad

Troubleshooting
Problem
Heater doesn't turn on with the
power switch.
There is an odor coming from the
heater.
20 |
Cause
Main power supply switch is off.
Circuit breaker has tripped.
Heater is unplugged from wall outlet.
Power cord or power plug are damaged.
Power outlet for power plug prong is
loose.
Loose wiring.
Heater power switch is off.
Heater system is overheated.
The heater may emit a slight, harmless
odor when first used. This is a normal
condition caused by initial heating of the
internal parts, and will not occur again.
Solution
Turn on the main power supply
switch.
Too many appliances on this
circuit. Be sure that the electrical
supply for this unit is an individual
circuit.
Plug the cord into an outlet.
Contact a SEI customer service.
Check the power outlet and
replace with a new one.
Contact SEI customer service.
Turn on the heater power switch.
Maybe the heater is covered, or air
inlet or air outlet is blocked, remove
the covering or the blockage and
turn off the power switch and
unplug it. Wait ten minutes, plug it
back in, then turn the heater on
again.

Publicidad

loading