LG LDG4313ST Manual Del Propietário página 28

28 OPERATION
Timer On/Off
The Upper or Lower Timer On/Off serves as an extra
timer in the kitchen that beeps when the set time has
run out. It does not start or stop cooking.
The Upper or Lower Timer On/Off feature can be
used during any of the other oven control functions.
The Upper and Lower Timer can be operated
independently of each other.
For example to set 5 minutes
1
Touch Upper Timer On/Off or Lower Timer On/
Off once.
0:00 appears and Timer flashes in the display.
2
Touch 5.
0:05 appears in the display.
3
Touch Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
nOTE
If Upper Timer On/Off or Lower Timer On/Off is
not touched, the timer returns to the time of day.
4
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Upper Timer On/Off or Lower
Timer On/Off is touched.
nOTE
• If the remaining time is not in the display, recall
the remaining time by touching Upper Timer
On/Off or Lower Timer On/Off.
• Touch Upper Timer On/Off or Lower Timer
On/Off twice to set the time in minutes and
seconds.
• Touch Upper Timer On/Off or Lower Timer
On/Off once to set the time in hours and
minutes.
Cancelling the Timer
1
Touch Upper Timer On/Off or Lower Timer On/
Off once.
The display returns to the time of day.
Settings
Touch the Settings key repeatedly to toggle through
and change oven settings.
The Settings key allows you to
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between Fahrenheit
and Celsius
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
Touch Settings once.
2
Touch 1 to toggle between a 12-hour and 24-
hour clock.
3
Touch Start to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. roast are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This auto-
converted temperature shows on the display. For
example, select Conv. Bake, enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
Touch Settings repeatedly until. Auto appears
in the display.
2
Touch 1 to disable or enable auto conversion.
3
Touch Start to accept the change.