Trio 596.73502201 Manual De Uso página 11

HOW TO kEYEk YOUR
If your refrigerator requires an ice maker
water supply connection, refer to How
to Connect the Water Supply section
before leveling your refrigerator.
MATERIALS NEEDED
:Y_" hex head driver
_- Level
1. Remove toe grille and bottom bracket
covers.
2. Turn both front adjustment screws (A)
clockwise to raise and counter-
clockwise to lower.
3. Turn both rear adjustment screws (B)
clockwise to raise and
counterclockwise to lower.
4. Turn stabilizing legs (C) clockwise
until firmly against floor.
5. Turn front roller adjustment screws
(A) 2 to 3 times counterclockwise, so
that full weight of refrigerator rests on
stabilizing legs (C).
6. Using a level, make sure front of
refrigerator is Y_" (6 ram) or '/, bubble
higher than back of refrigerator. See
leveling step 3 for assistance.
7. Replace toe grille and bottom bracket
covers. See markings on inside of toe
grille to insure proper placement.
_- Snap bottom portion into place
first. Press down on top part of
grille until top portion snaps into
place.
!'!1
m
11