PICO PicoConnect 900 Guia Del Usuario página 10

PicoConnect 900 Series Probes
A
Top: Connecting the probe to the measuring instrument. (A) Measuring instrument.
(B) High-flex cable supplied with probe. (C) PicoConnect probe. (D) Device under test.
Middle: Removing test pins to allow connection of solder-in wire. (E) PicoConnect
probe. (F) Test pins (signal and ground). (G) Serrated-jaw pliers.
Bottom: Using solder-in connection. (H) PicoConnect probe. (I) Solder-in gold-plated
wire supplied with probe. (J) Device under test.
8
B
E
H
Copyright © 2017 Pico Technology Ltd. All rights reserved.
5 mm
D
5 mm
C
G
F
I
J
User's Guide
DO274-4