TONOR TW820 Manual De Instrucciones página 11

As shown in above pictures:
1. ANT B
2. BAL B
3. MIX
Before using the device, take out the wireless receiver from the package,
and connect the following cables: firstly use the 6.35 audio cable to
connect the receivers MIX's port and other audio devices (speaker,
amplifier, mixer, etc,). Secondly, erect the antenna, and connect the
power cable. Thirdly, check if microphone is connected to the receiver
successfully after turning on the device.
1 2 3 4 5
4. DC IN
5. BAL A
6. ANT A
10
6