Somerset CDR-100 Manual De Operación página 3

CAREFULLY READ ALL INSTRUCTIONS BEFORE YOU START
UNCRATING AND SETUP
1. Remove the straps that are wrapped around the box and lid.
2. Lift the machine straight up out of the box.
3. Install the machine in its final position or temporarily secure it to a solid surface.
4. Wipe off any dirt that may have accumulated during shipping using a soft cloth.
5. Check the data tag for correct voltage and frequency.
6. Turn the power switch on the unit to "OFF" (red button).
7. Plug the machine to the proper power source that matches the data tag
requirements.
8. Turn the power switch "ON" (green button) and check for proper operation of the
machine.
 KEEP YOUR HANDS AWAY FROM INFEED
 DO NOT INSERT FOREIGN OBJECTS INTO INFEED
 DO NOT CLEAN MACHINE WHILE CONNECTED TO
ELECTRICAL SUPPLY
 WATCH YOUR HANDS AND FINGERS
NOTE: The machine will not operate when safety cover is removed.
L020-030
> > WARNING < < <
>
PAGE 1 OF 5 REV B – JULY 2019