Somerset CDR-100 Manual De Operación página 7

Never use the emergency stop as an on and off switch. The emergency
•
stop is to be used only in emergency situations.
Install the scrapers in the opposite order of their removal.
•
Close the safety cover and secure it with the four thumb screws.
•
Turn the power ON, and the machine is ready to use.
•
If the machine does not start:
•
Check if the AC Power is available.
1.
Make sure the plug connected.
2.
Make sure the cover is down securely.
3.
Ensure all scrapers are installed properly.
4.
Check the E-Stop, make sure it is pulled out.
5.
Check for any missing magnets on the safety cover.
6.
• If rolls ever start to squeal due to dryness, remove and clean the scraper
blades thoroughly and rub the beveled edge with cooking oil, like
vegetable or canola. This technique will remove the squealing sound
you get from friction between the roller and the dry scraper.
 THIS MACHINE IS MAINTENANCE FREE!
 NEVER USE OIL OR GREASE ON ANY OF THE PARTS OF THE
MACHINE!
ALL PARTS ARE PERMANENT SELF LUBRICATED

L020-030
Quick Tips & Troubleshooting
CAUTION
PAGE 5 OF 5 REV B – JULY 2019