Levenhuk MAGUS CHD20 Guia Del Usuario página 6

C O N TRO L PAN EL
To open the Camera control panel, move the mouse cursor to the left of the window. The control panel will automatically pop
up.
CAMERA CONTROL PANEL
6
FUNCTION FUNCTION DESCRIPTION
Snap
Record
Auto Exposure
Exposure Compensation
Exposure Time
Gain
Red
Green
Blue
Auto White Balance
Manual White Balance
ROI White Balance
Sharpness
Denoise
Saturation
Gamma
Contrast
DC (Direct current)
AC(50HZ)
(Alternative current)
AC(60HZ)
(Alternative current)
Default
Captures the image and saves it to the SD card.
Records a video and saves it to the SD card.
Automatically adjusts the exposure time and gain according to
the exposure compensation value.
Available when Auto Exposure is selected. Adjusts the
exposure compensation according to the current video
brightness to achieve the proper brightness value.
Available when Auto Exposure is not selected. Adjusts the
time of exposure and thus adjusts the brightness of the video.
Adjusts the brightness of the video. The Noise will be adjusted
accordingly.
Adjusts the proportion of the red color in RGB in the video.
Adjusts the proportion of the green color in RGB in the video.
Adjusts the proportion of the blue color in RGB in the video.
Adjusts the White Balance of the video continuously.
Adjusts the Red color or Blue color parameters to set the
White Balance of the video. White balance is adjusted to
obtain a natural ratio of cold and warm colors on the image
with regard to the light source type. Move the corresponding
sliders to adjust the values.
Adjusts the white balance of the Region of Interest when the
Region of Interest content is changed.
Adjusts the Sharpness level of the video.
Removes the noise from the video.
Adjusts the Saturation level of the video.
Allows you to adjust the midtone values of the image. The
higher the Gamma value is, the darker the image will be.
Adjusts the Contrast level of the video.
Allows you to use a light source without light flickering.
Eliminates light flickering when a 50Hz light source is used.
Eliminates light flickering when a 60Hz light source is used.
Restores the default settings.