Setting The Alarm Recording Mode - Sony SVT-5050P Manual De Instrucciones

Alarm Recording
6
Press SHIFT $ to move the flashing to SERIES.
7
Set in which mode the alarm recording begins by
pressing REC/PLAY SPEED +/–.
Y (yes): accepts alarms only in recording mode.
When the VCR is in seriers recording (see page
16), set to Y.
N (no): accepts alarm in recording mode, stop
mode, power off mode or one-shot recording
mode.
<
I S H O T S E T
F I ELD
I NTERVAL
<
A L A R M S E T
DURAT I ON
SER I ES
8
Press SEARCH to return to the normal display.

Setting the Alarm Recording Mode

1
Press MENU until the OTHER display appears on
the screen.
< >
O T H E R
R E P E A T
T A P E E N D
A L A R M M O D E
R S - 2 3 2 C
2
Press SHIFT $ to move the flashing to ALARM
MODE.
3
Set ALARM MODE to Y, Y1, Y2 or N by
pressing REC/PLAY SPEED +/–.
Y (yes): accepts alarms and starts recording
whenever an alarm signal is received.
Y1: accepts alarms and starts recording only in
timer recording mode.
Y2: accepts alarms and starts recording except in
timer recording mode.
N (no): does not accept alarm even if an alarm
signal is received.
< >
O T H E R
R E P E A T
T A P E E N D
A L A R M M O D E
R S - 2 3 2 C
4
Press SEARCH to return to the normal display.
26
>
I
I M
>
I M
Y
M O D E 1
- 3 M
Y
1 2 0 0
M O D E 1
- 3 M
Y
1 2 0 0
Notes
• While alarm recording is in progress, other modes
are inoperable.
• After the alarm recording is completed, the VCR
returns to the condition it was in before the alarm
signal was received.
• If an alarm signal is received while the VCR is in
repeat recording (see page 16), repeat recording
stops and the REPEAT indicator goes off. After the
tape reaches the end, the tape is rewound and the
VCR stops. The OFF indicator lights in the display
window.
OFF
H M S
When the OFF indicator lights, in order to prevent
accidental erasure of a recorded tape, timer recording
and alarm recording cannot be executed.
If any of r REC, ) FF, 0 REW, z PLAY is
pressed, the OFF indicator goes off.
• If another alarm is received while alarm recording is
in progress, the second alarm recording starts and the
recording duration is extended.
• If the power is interrupted while alarm recording is
in progress and restored again, the operation before
the alarm recording was made resumes.
Indicators during alarm recording
The AL indicator flashes in the display window.
H M
The count (left digit) of the alarm recording flashes on
the monitor screen.
The alarm recording can be counted up to 999.
When the alarm function has worked 1000 times, the
count number returns to 000.
1 5 - 1 0 - 9 6 T U E 0 0 1
0 4 : 1 5 : 4 3 3
S
Alarm count number