Adler europe AD 7863 Manual De Uso página 6

I. Automatic mode indicator
K. Fan high speed indicator
M. Timer indicator
O. Humidity indicator
Q. Full water tank indicator
S. LED digital display of humidity and timer and room temperature
CONDITIONS OF USE
This dehumidifier is not suitable for keeping the humidity very low approximately 50% or less
This dehumidifier is designed to remove uncomfortable humidity in daily life and to use for auxiliary drying of washed clothes
indoors. This is not suitable for keeping the humidity very low
It is normal the device produces heat during the operation and room temperature rises by 1C to 4C, because this device does not
have cooling function. The temperature gets higher while it is operated in a closet or the like. Furthermore, room temperature rises
because doors and windows are closed and heat is produced from other appliances in the room and the sun radiation This
dehumidifier can't be applicable to keep extreme low temperature. The function of this dehumidifier is to pump off the unpleasant,
high humidity.
DEVICE SELF-DEFROSTING FUNCTION
When the frost builds up on the evaporator coils inside the device, the automatic defrost function will be started. The compressor will
turn off and the fan will continue to run until the frost is removed. When the device is running in a room temperature between 5
degree of Celsius and 12 degree of Celsius, it will stop to defrost for about 3 minutes every 8 minutes. When the device is running in
a room temperature between 12 degree of Celsius and 18 degree of Celsius, it will stop to defrost for about 5 minutes every 25
minutes. When the device is running in a room temperature between 18 degree of Celsius and 23 degree of Celsius it will stop to
defrost for about 5 minutes every 120 minutes. Wait 3 minutes before resuming operation. After the compressor has stopped, it
cannot restart operation until 3 minutes has passed. The indicator (J) on the control panel (1) is lighted up all the time the self-
defrosting is active.
IMPORTANT !
Both the dehumidifying function and the air cleaning function stop during the defrosting operation
Do not disconnect the plug of the device or turn off the device during the defrosting
Dehumidifying capacity
1. The daily dehumidifying capacity of the dehumidifier depends on room temperature and relative humidity. At different temperatures
and relative humidity, it may have different dehumidifying capacity.
2. In the same room temperature, the dehumidifying capacity is higher in higher relative humidity and the dehumidifying capacity is
lower in lower relative humidity. In the same relative humidity, the dehumidifying capacity is higher in higher temperature and the
dehumidifying capacity is lower in lower temperature.
3. If the dehumidifier is placed in the cabinet, its dehumidifying capacity may highly reduce in a short period after operating due to
the humidity in the cabinet has been highly reduced.
4. For 30°C / 27°C of room temperature and 80% / 60% of relative humidity the dehumidifying capacity is respectively around 25 /13
liters of water when the air outlet is fully open.
Air purification system - 3-stages filtration
System is designed to remove pollutant particles and an odors in the air. The device includes following filters:
1. Washable mesh air pre-filter (8): use to filtrate dust and hair in the air.
2. Activated carbon filter: remove an odor caused by e.g. cigarette, pet, etc..
3. HEPA filter H13: It filtrates dust, pollutant particles and refreshing an air. The HEPA H13 filter effectively retains 99.95% of
pollutant particles of size up to 0,3 microns in the flowing air. HEPA H13 filter is suitable for air purification for allergy sufferers.
Operation
1. Please place the device upright to avoid miss operation and unusual sound. Keep distances between other objects like shown at
picture 1.
2. HEPA filter (7) is packed in polybags, please do remove the polybag before using.
3. Open the black lid on the top of device to let the air come out easy.
4. Plug in the device, the power switch (A) is blinking on the control panel (1), press it to turn on the device. The digital display (S)
will show present humidity level in room. At the same time the humidity indicator light (10) will lighted up on the front-top edge of the
device.
During operation, the humidity indication light shows current humidity level in room:
- Blue color means low humidity below 50% relative humidity
J. Device self-defrost indication
L. Fan low speed indicator
N. Temperature indicator
P. Target humidity indicator
R. Power indicator
6