• Warning: if this appliance is installed in a bathroom, it must be installed at least 60 cm
from a bath or shower (volume 2), in accordance with the requirements of the French
electrical installation standard NFC 15 -100.
• The device must be connected to a circuit independent electric protected by a bipolar
circuit breaker according to the standard electrical installation NF C 15-100.
• WARNING: The heater must not be used if the glass panels are damaged.
• Means for disconnection from the supply mains having a contact separation in all poles
must be incorporated in the fixed wiring in accordance with the wiring rules.
• With respect to the details of how to install the appliance onto the wall, refer to the
"INSTALLATION" section.
• Regarding the detailed information on the connection of the electric cable, refer to the
section "ELECTRICAL CONNECTION".
INSTALLATION
RECOMMENDATIONS IMPORTANT READ BEFORE INSTALLATION
- Do not install the unit directly below a socket.
- Do not use the appliance outdoors.
- Do not install the unit in an air current that could disrupt its regulation.
- Do not place the unit near a barrier limiting the airflow around it.
- Attach the heater vertically to the wall as described below.
- Choose screws and plugs suitable for the wall material and weight of the unit.
EN