Publicidad
Idiomas disponibles
Idiomas disponibles
Malfunction display and solutions
When the washer is in trouble, please contact local service office or the sales service department of our com-
pany and the customer should not dismantle the machine.
If the washer can not work normally, and the abnormal indication is shown in the digital display window or the
machine alarms, please check and correct them as follows.
Falut
Alarm for water inlet
Drain Alarm
Alarm for opening lid
Imbalance Alarm
Note: The program which has E4 alarm when shocked in the first time is "Air dry" and "Tub clean".
Cause of fault
Water injection for
about 1 hour, but do
not reach preset water
level.
Drain off water 10 mins
not arrive at empty
water level.
While spinning or delay
function starts , there
will be an alarm
if open the lid , and
only to be suspended
without alarming in
the spinning process.
Checked imbalance
for the third time.
Alarm of the
Indication
buzzing sound
"E1"flares
The buzzer goes
on buzzing for 10
seconds. If the
fault is not solved,
buzzes again for
10 seconds in
every 15minutes.
"E2"flares
"E3"flares
"E4"flares
41
AUTOMATIC WASHING MACHINE
TLA014580MD
Stopping alarm
Open the lid to
deal with faults,
then close the
lid to stop the
alarm.
Publicidad
