SEVERIN SM 3579 Instrucciones De Uso página 9

Preparation
∙ Plug in the power plug. The appliance is now in standby
mode, with the three function icons flashing slowly.
∙ Select the desired function by pressing the On/Off
button.
è cold frothing
è warm frothing
or heating milk
è hot chocolate / cocoa
∙ When the respective function light comes on, wait a
moment. Processing will start automatically after about 2
seconds.
∙ To prepare cocoa and hot chocolate, fill in the desired
amount of cocoa powder or chocolate (see Preparation
instructions).
∙ Once processing is complete, the appliance emits
beeps, and the heating and stirring process stops
automatically.
∙ You can now remove the milk container from the base.
∙ Pour out the prepared food, or use a suitable spoon
to take off the milk froth. Do not leave any residual
amounts in the container.
∙ Detach the power cord from the wall socket after use.
∙ Always allow the appliance to cool down first, and then
clean it, before starting a new cycle.
Preparation instructions
Milk froth:
∙ We recommend using milk with a high protein content.
For best results, the milk should be taken from the
refrigerator immediately before frothing.
∙ To achieve a thicker froth, go through a cold-frothing
cycle first, followed by a hot-frothing cycle.
Hot chocolate / cocoa:
∙ To prepare drinking chocolate from milk and chocolate
or cocoa.
∙ Grate the chocolate finely before preparation.
∙ Fill in the chocolate / cocoa only after the programme
has started, when the milk is already being stirred.
Otherwise, the stirring tool could jam.
∙ We recommend using the following amounts of
chocolate:
200 ml milk è approx. 15-20 g
350 ml milk è approx. 30-35 g
+
+
Interrupting a cycle
∙ You can stop the heating and stirring process at any
time by pressing the On/Off button.
Automatic switch-off
∙ The appliance switches off automatically two minutes
after non-use.
Cleaning and care
∙ Before cleaning the appliance, ensure it is disconnected
from the power supply and has cooled down completely.
∙ To avoid the risk of electric shock, do not clean the base
or the power cord with water and do not immerse them.
∙ The base can be cleaned with a soft, damp cloth and
some detergent.
∙ After each use, immediately clean the milk container,
stirring tool, cover and lid thoroughly in warm water with
a little detergent or in the dishwasher. If necessary, use
a brush to clean the stirring tool.
∙ Wipe all parts thoroughly dry.
∙ Do not use abrasives or harsh cleaning solutions.
Disposal
Devices marked with this symbol must be
disposed of separately from your household
waste, as they contain valuable materials which
can be recycled. Proper disposal protects the environment
and human health. Your local authority or retailer can
provide information on the matter.
9