Publicidad
Idiomas disponibles
Idiomas disponibles
The TJ wood pellet fireplace is a heating system that has been manufactured with the most advanced technology and a high level of quality, which allows you to enjoy the extraordinary
feeling of a fire in total safety.
•
We would ask you to read this manual closely because it contains important instructions regarding safety for installation, use, and maintenance.
•
This manual, along with the documentation supplied, must be kept in a place that is easy and quick to access.
•
Installation of TJ air heaters must be performed solely by authorised personnel who follow the instructions from the manufacturer and in accordance with any regulations in force.
•
The manufacturer is not responsible for any possible damage that could be caused by the incorrect installation of handling of the unit..
1. GENERAL WARNINGS AND SAFETY
The installation must be carried out by an authorised person who must provide the purchaser with a declaration for the installation in which they accept full responsibility for the final installation.
In the same way, the product must be started up by an authorised person who must provide the purchaser with a product start-up document in which they accept full responsibility for the final
installation and operation of the installed unit.
FERLUX shall not bear any responsibility in the event that these precautions are shown to have not been met.
All national and local regulations, as well as European regulations, must be satisfied when the unit is being installed. All national and local regulations, as well as European regulations, must
be satisfied when the unit is operational.
FERLUX S.A. accepts no responsibility in the event of the aforementioned requirements failing to be met.
Our units are manufactured and tested, with all their parts being monitored, in line with the safety directives of the European Union, which aim to protect both the user as well as the installer
against possible accidents. Technical personnel are strongly urged to pay close attention to the connections, wiring, and electrical voltage when they are required to perform any kind of
operation on the unit.
The manufacturer is not liable for any responsibility, whether contractual or extra-contractual, for damages caused to persons, animals, or objects due to errors in the installation, configuration,
and/or maintenance.
This heater must only be used for the purpose for which it was specifically designed.
Certain extreme weather conditions, such as strong winds, hail, or the risk of frost, could mean that the chimney flue is insufficient. Due to the potential risk of back-puffing smoke, use of the
unit in these circumstances is not recommended. This cannot be considered as a defect in the unit or as unsatisfactory functionality.
For your safety, you must bear in mind that:
•
The user of the heater must be a responsible adult. This unit has not been designed to be used by people whose physical, sensorial, or cognitive capabilities are limited or who
have no experience or expertise in the matter. Children must be watched closely and taught how to behave in order to guarantee that they do not play with the unit or come
into contact with surfaces that are hot when in operation.
•
The connection to the power supply and its corresponding power outlet must be easily accessible at all times. It is absolutely prohibited to make the unit operate with a
damaged power cable. If the power cable is damaged, it must be immediately replaced.
•
Do not disconnect the plug from the power outlet when the unit is turned on.
•
The door on the heater must always remain closed when the heater is in operation.
•
Avoid coming into contact with areas of the unit that reach a high temperature when in operation, especially with the glass and the door.
•
Following an extended period of disuse, before turning the unit on, check that there are no obstructions in the smoke extraction ducting
________________________________________
1 In extreme cases or breakdown, safety systems may intervene. In this case, contact the Technical Support Service. DO NOT DEACTIVATE THE SAFETY SYSTEMS.
¡¡¡ATENTION!!!
THE INSTALLATION MUST BE CARRIED OUT BY AN AUTHORISED PERSON WHO MUST PROVIDE THE PURCHASER WITH A DECLARATION OF CONFORMITY
FOR THE INSTALLATION IN WHICH THEY ACCEPT FULL RESPONSIBILITY FOR THE FINAL INSTALLATION AND, CONSEQUENTLY, THE PROPER OPERATION
OF THE INSTALLED UNIT. FERLUX SHALL NOT BEAR ANY RESPONSIBILITY IN THE EVENT THAT THESE PRECAUTIONS ARE SHOWN TO HAVE NOT BEEN MET.
In order to be able to enjoy the legal warranty in accordance with EEC Directive 1994/44EC, a user must fully comply with all of the instructions contained in this manual, and
especially:
•
Must always act within the limits of use of the heater.
•
Must always perform ongoing and thorough maintenance.
•
Must authorise the use of the heater only to persons of proven capacity, attitude, and who are properly trained for such a task.
The manufacturer accepts no responsibility, legal or penal, directly or indirectly, for:
•
An installation that is not in full compliance with the regulations in force in the country as well as safety directives.
•
Non-compliance on the part of unqualified and/or untrained personnel.
•
Usage not in compliance with safety directives.
•
Modifications and repairs not authorised by the Manufacturer and made to the unit.
•
Use of spare parts that are not original or are not specified for that specific model of heater.
•
Insufficient maintenance.
•
Exceptional circumstances.
We thank you for choosing us
SYMBOLS
27
27
.
1
EN
Publicidad
