Power Probe PPDRAW Manual Del Usuario página 3

PPDRAW
4. System Settings
Press the menu button to enter the menu, where you can set the auto power-off time
and current alarm value.
- Auto Power-off Time: This setting determines how long the device will automatically
power off when there is no operation. You can adjust the auto power-off time by
selecting the option and using the left or right buttons.
- Current Alarm Value: In the normal display mode and smart output state, if the output
current exceeds or equals the preset alarm value, the interface will display a red
warning. You can set this value in the menu by selecting the option and using the left or
right buttons.
5. Bluetooth Connection
In both the normal display mode and graphic display mode, you can use the link button
to turn the Bluetooth device on or off. When turned on, you can use the PowerProbe
Link App to scan for and connect to the device.
6. Charging
The device has a built-in high-capacity lithium battery and can be charged through
a USB Type-C port, supporting PD fast charging. Please use a standard charger to
charge the device.
IV . Precautions
1. This product can only be connected to the OBDII port of a car to complete the
corresponding functions. Please do not connect it directly to active devices
without using the OBDII port. Before connecting to the OBDII port, please make
sure that the car's OBDII port is a standard OBDII port and the wiring is correct. It is
recommended to verify that there are no major faults in the car's power supply system
before connecting the unit. If the OBDII port is not standard, wiring errors and other
reasons cause damage to the machine or car circuit, our company will not be held
responsible.
2. The maximum output current of this product is 10A. The limited current of the OBDII
port of some cars is lower than this value, and there may be current limiting measures
such as fuses. Therefore, after connecting the Smart Output of this product, it is
recommended not to make the current of the entire car system greater than the
limited current of the OBDII port of the car itself, so as to avoid problems such as the
car's own OBDII fuse being blown.Do not input voltages exceeding the device's range
(30V) into the OBDII port. If a voltage exceeds the range, disconnect the voltage as
soon as possible. If the voltage exceeds 30V, an overvoltage warning interface will be
displayed.
3. The device can output a maximum of 10A current. If the current exceeds this limit,
an overcurrent warning interface will be displayed. Do not output current exceeding
10A for an extended period. If an overcurrent warning appears, restore the current to
normal as soon as possible.
4. The device can output a maximum of 10A current. If the current exceeds this limit,
an overcurrent warning interface will be displayed. Do not output current exceeding
10A for an extended period. If an overcurrent warning appears, restore the current to
normal as soon as possible.
5. The machine has temperature protection. If the temperature of the battery or the
2
EN