DeLOCK 64128 Manual Del Usuario página 3

English
Installation
1.
Turn off your PC and unplug the power cord.
2. Open the housing.
3. Connect the cable to the hub ("IN") and to the respective
connector of your motherboard.
4.
Now you can connect more cables for the LED illumination to
the hub.
5. Connect a power cable of your power supply to the SATA port
of the hub.
6.
Reattach the housing and connect the power cord to the AC
adapter.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage:
www.delock.com
Final clause
Information and data contained in this manual are subject to change
without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted
for any purpose, regardless in which way or by any means,
electronically or mechanically, without explicit written approval of
Delock.
Edition: 04/2024
-3-