Betzold 77674 Instrucciones página 6

Assembly instructions with 3 storage trays
1. Lay the upper storage tray (P1) with the top surface pointing downwards on the floor.
2. Take four identical connecting rods (P4), (P5) or (P6) – depending on desired height – and put them into each corner of storage tray (P1). Pat tight by using a hammer.
3. Set the middle storage tray (P2) on top of the connecting rods as shown on the right image.
4. Take additional four connecting rods (same length) and put these into the corners of the middle storage tray. Pat these tight by using a hammer.
5. Set the lower storage tray (P3) on top of the connecting rods as shown in the images. Pat tight by using a hammer.
6. Assemble two wheels with brakes (B) and two wheels without brakes (C) into the designated openings of each corner of the lower storage tray (P3).
Assembly instructions with 2 storage trays
When assembling the Trolley with two storage trays, skip point 3 and 4.
Scope of delivery
1 upper storage tray P1
1 middle storage tray P2
1 lower storage tray P3
4 connecting rods long P4
4 connecting rods middle P5
4 connecting rods short P6
2 wheels with brakes B
2 wheels without brakes C
Art.-Nr. 77674, 78064 6 © Arnulf Betzold GmbH