FoodSaver FFS017X-01 Instrucciones Para El Usuario página 7

FoodSaver Canisters
™
FoodSaver canisters are simple to use and ideal for
™
vacuum packaging delicate items such as muffins
and other baked goods, liquids and dry goods.
FoodSaver Fresh Zipper Bags
™
FoodSaver Zipper Bags feature special channels
™
that enable the efficient removal of air. The multi-
ply construction makes them an especially effective
barrier to oxygen and moisture.
FoodSaver Fresh Containers
™
FoodSaver Fresh Containers are simple to use and
™
ideal for vacuum packaging delicate items such as
muffins and other baked goods, liquids and dry
goods.
FoodSaver Bottle Stopper
™
Use FoodSaver bottle stoppers to vacuum package
™
wine, non-carbonated liquids and oils. This will
extend the life of the liquid and preserve the flavour.
Don't use the bottle stopper on plastic bottles.
FoodSaver Quick Marinator
™
The quick marinator infuses food with flavour in
minutes instead of hours using vacuum power to
penetrate marinades deep into the food.
Ordering
To order FoodSaver
™
please visit www.foodsaver.co.uk.
Parts
Referrring to Fig. 1:
Control panel
A
Appliance lid
B
Retractable handheld
C
sealer
Latch
D
Roll cutter
E
Upper sealing strip
F
Upper gasket
G
Accessory button
H
Marinate button
I
Removable drip tray
J
Lower sealing strip
K
bags, rolls and accessories
Cutter bar
L
Lower gasket
M
Roll storage area
N
Power light
O
Seal light
P
Vacuum & Seal light
Q
Moist food light
R
Moist food button
S
Vacuum & Seal button
T
Seal button
U
Making a bag from a
FoodSaver
You can make your own custom sized bags from a
FoodSaver
1. Plug your food preservation system into the
mains supply socket. Move the latch
unlock position ( ).
2. If you haven't already done so, open the lid and
insert a FoodSaver
Pull the roll end out until about 10mm of the roll
overlaps the sealing strip
Note: The visible FoodSaver
see how much bag material you have left, so you
can quickly see when you will need to replace a
roll or purchase more.
3. Close the lid all the way and move the latch to
the on position ( ). The power light comes on to
indicate that the appliance is ready to use. Press
the Seal button
the seal light goes out, the end of the roll will
now have been sealed.
4. Move the latch to the unlock position ( ). Pull
the roll out to the required length for the item
being packaged. Add an extra 75mm to allow
the bag to be sealed then slide the roll cutter
across to cut the roll.
Using your Food Preservation
System
Referring to Fig. 3:
1. Place the item to be packaged into the bag. You
can use a ready made FoodSaver
your own from a FoodSaver
2. Move the latch
open the lid. Place the open end of the bag into
the slot of the drip tray.
3. Close the lid and move the latch to the on
position ( ).
4. Press the Vacuum and Seal button
FoodSaver
from the bag (the vacuum and seal light comes
on). When fully vacuumed, the bag starts to seal.
Note: Press the Vacuum and Seal button at any
time to pause the process. Or, press the Seal
button to immediately stop the vacuum process
and start sealing the bag.
5. The process is complete when the vacuum and
seal light goes out.
www.foodsavereurope.com
Roll
™
roll. Referring to Fig. 2:
™
roll into the storage area.
™
.
K
™
to create the first seal. When
U
™
to the unlock position ( ) and
D
appliance will start to remove the air
™
to the
D
roll allows you to
E
bag or make
™
roll.
. Your
T
7