Publicidad
Idiomas disponibles
Idiomas disponibles
Connect the unit by inserting the charging cable into DC 5V IN jack, and
inserting the other end into the USB interface or USB charger. The charging
time is around 2 hours. The charging indicator will flash during battery
charging.
If the unit has not been used for a long period of time, the rechargeable
battery may be completely discharged into a "sleep mode" condition. This
is the characteristics of all the rechargeable battery. For the first time to
recharge (to wake up) the battery, it is recommended to charge for a
period exceed 5 hours but not exceed 24 hours.
DC ADAPTER (OPTIONAL)
To use 5V AC/DC adapter for external DC charging, plug the connecting
cable to the DC charging port. (Voltage adapter is an optional accessory. Do
not charge the battery with the AC / DC adapter for more than 24 hours.)
CLOCK
1. Check the unit is in Standby Mode.
2. Press CLOCK SET for 2 seconds to start clock setting.
3. To set the 12Hrs / 24Hrs display, press PRESET (Next / Previous) while the
display is still flashing.
4. Press CLOCK SET to hour setting.
5. To set the hours, press PRESET (Next / Previous) while the display is still
flashing.
6. Press CLOCK SET to minute setting.
7. To set the minutes, press PRESET (Next / Previous) while the display is still
flashing.
8. Press CLOCK SET to complete the clock setting.
ALARM
1. Check the radio is in Standby Mode.
2. Press ALARM SET for 2 seconds to start alarm setting.
3. To set the hours, press PRESET (Next / Previous) while the display is still
flashing.
4. Press ALARM SET to minute setting.
5. To set the minutes, press PRESET (Next / Previous) while the display is still
flashing.
6. Press ALARM SET to buzzer / radio setting.
7. To set the Alarm sounds, press PRESET (Next / Previous) while the display
is still flashing.
8. Press ALARM SET to volume setting.
9. To set the Alarm sounds volume, press PRESET (Next / Previous) while the
display is still flashing.
10. Press ALARM SET complete the alarm setting
REMARK: Press ALARM SET once during in standby mode to enable / disable
the alarm function. To make sure the display is showing "alarm icon" if
alarm function is in using.
To turn off the alarm, press any button once.
Publicidad
