Brigmton BT-127-N Manual De Instrucciones página 11

SLEEP
1. Switch POWER button once to switch on the unit.
2. Press the POWER for 2 seconds to entry SLEEP setting mode. Press the
POWER button to select a time. For example, when the display shows "SL
15". The radio turns on and then turns off automatically after 15 minutes.
3. To select a longer playing time, press the POWER button to select 15 / 30
/ 45 / 60 / 75 / 90 minutes or OFF.
4. To turn off the radio at any time, press the POWER to standby mode.
RADIO
1. Switch POWER button once to switch on the unit.
2. Press TUNING + / - button for a second to start radio scanning.
3. Press TUNING + / - button to adjust the radio frequency.
3. Adjust the sound volume by pressing VOLUME + & VOLUME -.
4. Switch POWER button again to switch off the unit.
Radio Stations Preset: You can store the frequencies of up to 50 FM and 20
AM radio stations in the memory. A stored frequency can be erased from
the memory by storing another frequency in its place.
Radio Auto Preset
1. Press PROG Button for 2 seconds to start Auto-Scan Preset Stations. It will
auto-stop when all the stations have been found out.
2. Press PRESET (Next / Previous) button once to select preset stations.
Radio Programming Preset
1. Tune to desire radio frequency.
2. Press PROG Button once to program mode. The "P01" will be shown on
the display. Press PRESET (Next / Previous) button to select stored position
"P02" "P03"... , and press PROG once to confirm.
3. Press PRESET (Next / Previous) button once to select preset stations.
Volume
Adjust the volume with the controls VOLUME + or VOLUME -
You may connect headphones with 3.5mm, plug to socket HEADPHONE.
The loudspeaker is then muted.
PRECAUTIONS:
1. Do not leave the batteries in the compartment for a long time. Remove
the batteries to avoid leakage and damage.
2. Do not expose the unit to extreme temperature nor high humidity to
ensure normal functioning for a long lifetime.
For instances, never place the unit in bathing areas nor around stoves and
radiators.
3. If you find the unit is not working properly, please take it to your nearest
services center. Do not attempt to repair by yourself.