TERMA ONE Manual De Instrucciones página 14

ONE
on/off button
Heater One has two radiator temperature
settings (45° C and 60° C) as well as auto matic
switch­off after 2 hours . The on/off button
is also used for the purpose of changing set­
tings, while different col ours of the LED di­
ode indicate current setti ng. The device has
a built­in IR receiver for wireless commu­
nication with an external controller which
provides additional func tions to the device.
Turning the device on and setting
heating temperature
The following settings are activated by
press ing of the on/off button in the follow­
ing order:
1. The device is turned on and automati
cally set to 45° C;
2. The heater switches to 60° C;
3. The heater is turned off. Current setting
is indicated by a LED diode:
14
User manual MOA
IR receiver
LED diode
power supply
cable
— Heater is off — diode is not on.
— Heater is on setting 1 (45° C) — yel low
light.
— Heater is on setting 2 (60° C) — red light.
Device settings are also remembered after
power outage.
Automatic switch-off (timer)
Pressing and holding of the on/off button
activates the TIMER function — the heater
works for 2 hours on setting 60° C, after which
it switches off. Active TIMER is indicated by pul­
sating diode. Regardless of whether the heater
is currently on or off the TIMER can be activat­
ed by pressing and holding the butt on. A quick
press of the button then turns the device off.