Fnirsi DMT-99 Manual página 22

Capacitance measurement
①Switch to the capacitor gear and connect
the red test pen to the input terminal
while the black test pen to the input
terminal
② During measurement, the range gear will
be automatically identified.
Frequency measurement
①Switch to the frequency gear and connect
the red test pen to the input terminal
while the black test pen to the input
terminal
② During measurement, the range gear
will be automatically identified.
Temperature measurement
Switch to the temperature gear and
connect the red test pen to the input
terminal
to the input terminal
Current Measurement-low current
①Switch to the low current range, and the
maximum measured current is 999.9mA,
connect the red test pen to the input
terminal , while the black test pen to
the input terminal
If the measured current is greater than 1A, it will burn out the fuse.
Please preliminarily evaluate the current before measuring.
.
.
, while the black test pen
.
.
,
,
Notice
15