Publicidad
Idiomas disponibles
Idiomas disponibles
Unfolding the stroller
To unfold the stroller, lay it fl at on the ground (Fig. 1),
release the frame lock (Fig. 2), and pull the handle
fi rmly upward (Fig. 3) until you hear the folding mech-
anism engage (Fig. 4).
Assembly and disassembly
of the rear wheels
To mount the rear wheels of the stroller, fi rst, push the
half shafts into the rear brake rod (Fig. 5) until they
are fully engaged (Fig. 6). Then put the wheels on the
half shafts until you hear a click. To remove the rear
wheels, press the button in the center of the wheel (Fig.
7) and remove it. To remove the wheel including the
half-shaft, press the button (Fig. 8) on the brake rod on
the respective side.
Mounting the front steering wheels
Place the front wheel set on the hub (Fig. 9) until you
can hear a clear click (Fig. 10). Make sure that the
wheel is properly locked. Repeat the procedure for
the second wheel. The front wheels can be locked for
straight motion. Turn the locking ring outside the stroll-
er to lock the wheel (symbol of a closed lock, Fig. 11).
1
3
5
7
9
2
4
6
8
10
Publicidad
