Descargar Imprimir esta página

My Junior VIGO Manual De Instrucciones página 17

Publicidad

Idiomas disponibles

Idiomas disponibles

11
13
15
17
19
Disassembly of the
front steering wheels
Press the wheel lock button (Fig. 12) and pull the
wheel out of the hub (Fig. 13). Repeat the procedure
for the second wheel.
Handle height adjustment
12
The stroller has a height-adjustable handlebar. Press
the round buttons on both sides of the handlebar and
set the desired height (Fig. 14).
Parking brake
The stroller is equipped with a parking brake on the
rear axle. Press the brake pedal to lock the wheels (Fig.
15). To release the brake, please lift the pedal.
14
Attention. The brake is not intended to slow down the
stroller and should only be applied when the stroller
is completely still.
Attention. The stroller is not suitable for running.
Attention! Before driving, make sure that the brake is
released.
Attention! Always block the brake when you park the
stroller on an inclined plane.
16
Assembly and disassembly
of the baby bath
The carrycot of the stroller is mounted by pressing it
onto the frame. The adapters on the sides of the carry-
cot must be clicked into the latching lugs of the stroller
(Fig. 16, 17). The locking mechanism is automatic. To
dismantle the carrycot, pull the handles of the carrycot
adapters upwards (Fig. 18).
The carrycot can be folded fl at. To fold the carrycot,
18
push the two handles on the bottom towards the cen-
ter of the carrycot (Fig. 19, 20).
20

Publicidad

loading

Productos relacionados para My Junior VIGO