ningbo CL002 Manual página 26

NOTICE
EN
• This is an i-Size booster seat Enhanced Child Restraint System. It
is approved according to UN Regulation No. 129, for use primarily
in " i-Size seating positions" as indicated by vehicle manufacturers
in the vehicle user's manual.
• If in doubt, consult either the Enhanced Child Restraint System
manufacturer or the retailer.
• ECE R129/03
WARNINGS & SAFETY INSTRUCTIONS
• To guarantee the optimal safety of your child, read this user
manual carefully and follow it.
• Only suitable for vehicle seats with automatic three-point belts
approved in accordance with UN regulation 16 or a comparable
standard.
• The vehicle belt buckle must never cross the belt guide of the seat.
If the belt whip is too long, the child seat is not suitable for use in
this position in the vehicle. In case of doubt please contact the child
restraint manufacturer.
• The child seat must always be secured correctly with the vehicle
belt in the vehicle even when not in use.
• Rigid objects and plastic parts of the booster seat should be
arranged and mounted in such a way that they are not likely to
become trapped during daily use of the vehicle by a moving seat
or in a vehicle door.
• Before each use make sure that the automatic three-point vehicle
belt is correctly adjusted and fits tightly to the child's body. Never
twist the belt!
• Any straps holding the booster to the vehicle should be tight , any
straps restraining the child should be adjusted to the child's body,
and the straps should not be twisted.
• After your child is placed in this booster, the safety belt must be
used correctly, and ensure that any lap strap is worn low down, so
that the pelvis is firmly engaged.
26