Publicidad
Idiomas disponibles
Idiomas disponibles
After 30 hours working, when the hood is switched off, the speed
indicator led will flash for 30 seconds in RED light in order to
signal the saturation of the grease filter.
While flashing, it is possible to reset the alarm by pressing the
TIMER button.
Dimmable lights functions
This function provides for lights dimmability, ranging from 20% to
100%, by continuously pressing the light key ON the remote control.
Functions are the following:
Hood light OFF – Shortly press the key – Light ON at 100%
Light ON at 100% - Shortly press the key - Light OFF.
Light ON at 100% - Continously press the key – Brigthness
reduction.
Releasing the key during reduction or increase – Light keeps the
iluminous intensity reached.
Light ON - Dimmed – Continuosly press the key – Brightness is
inverted if compared to thr previous functios.
Coloour temperature setting (2.700ºK a 6.000ºK)
Make sure that the lights and the fan are off.
Holding down the TIMER key will turn on the light at the
previously set colour temperature.
Press and hold the Light key to change the colour temperature.
As long as the key is kept pressed, the colour temperature is
changed from warm to cold, just leave the Light key to select the
desired colour.
Exit the colour temperature selection function by pressing the
ON/OFF key.
POR
E L A N T O - N A T O I N I T A L I A
43
Publicidad
