FLINQ Nova FQC8310 Manual De Instrucciones página 5

EN Manual
Never insert metal objects in any opening of the (USB) charging port.
The rechargeable battery is built into the device and can be replaced.
Do not throw the battery into the fire, otherwise it may explode. Batteries
may also explode if being damaged, please handle and disposal it according
to local conditions and regulations. After 3 months long storage, need to
completely discharged and recharge for at least 80%.
The battery used in this device may present a risk of fire or chemical burn if
mistreated. Do not disassemble, short contacts, heat above 60°C (140°F), or
incinerate. Keep away from children. Do not disassemble and do not
dispose of in fire.
- Ensure that the device do not come into contact with heat sources, hot
objects or naked flames.
- Do not attempt to charge the device when the battery is damaged.
- Leaks from battery cells can occur under extreme conditions. If the liquid
gets on the skin, wash it immediately with soap and water. If the liquid gets
into the eyes, flush them directly with clean water for at least 15 minutes
and seek medical attention.
Button use
1. Touch the top button switch to turn the lamp ON and touch again to
adjust the desired light colors (2700K/4000K and 6000K) and to turn the
lamp OFF again (multi touch cycle function)
2. When one of the desired 3 light color is selected press and hold the touch
button switch to dim the light to the required brightness setting and
release it. Press and hold again to brighten the light.
Instructions for maintenance and use
In case of non-use, store the product in a cool and dry place away from
direct sunlight.
Caution
NON-Replaceable LED lights!
Please note
A) Use with caution at all times.
B) Product specifications are subject to change without notice.
C) If disassemble the device without authorization, we cannot guarantee
the quality.
8
Troubleshooting
Light does not turn on?
- Button use >>> Try to power on/off by the button or re-connect the USB
cable connection or adapter from the main power outlet.
- Not working >>> Is the battery full? Please replace and make sure the
adapter is connected to the mains power and retry.
The battery runs out too quick?
- Weak battery: Re-charge for at least 24 hours.
Note
If the lamp does not work or respond at any possible way please
disconnect the power (adapter) from the (mains) power outlet and wait
for at least 15min and then re-connect it again.
Cleaning
- Make sure the lamp is kept dust free and clean. Clean it regularly with a
dry anti-static cloth and with warm, soapy water but make sure that no
water liquid can enter the lamp luminaire. Dry the lamp before turning
it ON again.
- Please do not immerse the main unit in water, it is not fully waterproof
IP68!
- Wipe gently with a clean soft cloth (microfiber) dampened with water or
a mild detergent.
- Do not use a strong irritant lotion such as gasoline, alcohol or rubber
water.
FlinQ Tablelight Nova
9