Publicidad
Idiomas disponibles
Idiomas disponibles
Temperature Control Panel
Setting the Temperature Control
Your unit has one control for regulating the temperature. The temperature control is located on the
•
inner wall of the refrigerator compartment.
•
The first time you turn the unit on, the unit will start at the default temperature set at the factory,
39ºF in the refrigerator section and 0ºF in the freezer section.
•
Then, adjust the temperature in the refrigerator compartment to 36ºF and run for at least 4 hours
before placing foods inside. This will ensure the freezer cabinet is thoroughly chilled and the
refrigerator compartment will be stabilized before food is placed. Then adjust the temperature
setting to your desired setting that best suits your needs.
To adjust the temperature in each section, press the appropriate section button, the selected
section will flash on and off. The temperature will change according to the pre-set temperatures
as shown above.
NOTE:
•
IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.
NOTE:
WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR
WHERE THE TEMPERATURE WILL DROP BELOW 50ºF (13ºC) OR RISE ABOVE
110ºF (43ºC). THE COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER
TEMPERATURES INSIDE THE REFRIGERATOR.
FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 50º
SET THE FREEZER TEMPERATURE CONTROL TO THE "COLDEST" SETTING.
THIS WILL IMPROVE THE OPERATIONS OF THE REFRIGERATOR UNDER
THESE CONDITIONS.
OPERATING YOUR APPLIANCE
1
Freezer Control Display
2
Economy Mode Icon
3
Quick Freeze Mode Icon
4
Alarm / Error Icon
5
Refrigerator Control Display
6
Freezer Setting Button
7
Refrigerator Setting Button
10
Publicidad
