Function Description - Num'axes TLK1038 Instrucciones De Uso

A. On / Off button and Mode button: a short press allows you to enter the menu (channel display, vibrator,%
of battery). A very long press of about 3 seconds turns the walkie-talkie on or off.
B. « + » button: in standby mode, a short press increases the volume. A long press deactivates the squelch.
C. « - » button: in standby mode, a short press decreases the volume. A long press will lock the keys.
D. « PTT » button (Push-To-Talk = press to speak): press this key to transmit, release it to receive. A short
press also allows you to validate or exit a mode.
E. Headset/external mic jacks: For connecting to external devices such as headsets or microphones.
F. USB connector: allows you to charge your walkie-talkie.
Press Button
1 short
Mode
press
1 short press Mode
2 short press Mode
2 short press Mode
3 short press Mode
Coverage / range
The maximum range depends on the field conditions, and is obtained in open spaces.
The maximum range may be limited by environmental factors such as obstacles created by trees, buildings or
other structures. Inside a car or a metal structure, the range may be reduced.
Coverage in towns, where there are buildings or other obstacles, is around 1 or 2 km.
In an open space where there are obstacles such as trees or houses, the maximum range is around 4 to 5 km.
In an open space without obstacles and with clear line of sight, in the mountains for example, coverage may
exceed 12 km.
Technical specifications
Frequency range
Number of channels
Channel spacing
Power output
Operating voltage
Charging time
Dimensions
Weight
Usage temperature
Inserting and removing the battery
When you install the battery, it should fit into the corresponding location in the aluminum frame on the back of
the walkie-talkie, then push it against the wall.
To remove the battery, please turn off the transceiver first.
The time between battery charges is around 8 active hours. This value is obtained for a standard cycle of 5%
transmission, 5% active reception and 90% standby time.
The images below show how to insert and remove the battery:
Talkie-walkie TLK1038 – indice B
Press Button
1 short press +
1 short press -
1 short press PTT
1 short press +
1 short press -
1 short press PTT
TLK1038 Walkie-Talkie
PMR446 MHz (UHF)
192
12.5 KHz
500 mW ERP
DC3.7V
Environ 2h
95mmX43mmX26mm (sans antenne)
110mmX43mmx26mm (avec antenne)
80g avec batterie
-10°C ~ +60°C

Function description

View the channel number
Increases the channel number
Decrease the channel number
Allows you to validate and exit the Menu
Allows to visualize if the vibrator is
activated or not
Allows you to deactivate the vibrator. 0
on screen
Activates the vibrator. 1 on screen
Allows you to validate and exit the Menu
View the % of the battery level.
10/36