Adler europe AD 4512 Manual De Uso página 5

17. WARNING: Be careful when handling the blades
cutting tools when cleaning the device.
18. WARNING: Always unplug the appliance when unattended and before assembling,
disassembling or cleaning.
19. WARNING: Do not use the equipment if the knives are damaged.
20. WARNING: Before replacing equipment or approaching parts that move during use,
turn off the equipment and disconnect from the power supply.
21. WARNING: Keep the appliance and its cord out of the reach of children.
22. Do not touch the knife blade as it may cause injury.
23. Only use accessories provided by the manufacturer.
24. While the device is operating, do not bring your hands or any other objects close to the
cutting knives, as this may result in injury.
25. Always unplug the device when it is not in use or you want to clean it.
26. Do not immerse the motor part of the device in water or any other liquid.
27. If the blades become jammed, always unplug the power cord from the electrical outlet
before removing the obstructions.
28. Be careful when handling the cutting blades when cleaning the device.
29. Make sure that no long hair, scarves, ties, etc. hang over the working blade of the
device.
30. Handle blades carefully to avoid injury.
31. Do not use aggressive detergents to wash the casing, as they may remove
informational graphic symbols such as scales, markings, warning signs, etc.
32. The device should be used on a stable, even surface, away from hot kitchen
appliances such as: electric stove, gas burner, etc....
33. Do not use the device near flammable materials.
Maximum uninterrupted working time: 1 minute
Device description:
.1. Blade grips 2. Universal blades 3. Frozen food blades 4. Eject button 5. Pulse button 6. Handle
Before first use:
1. Remove all packing materials.
2. Clean the whole device and blades with a soft damp cloth.
Device assembly:
1. Assemble the knives as show on page 2. The right part of the moving knife has a assembly peg, the left sice of the moving knife has
an assembly slot. Insert the peg into the slot and make sure it does not pop out.
2. Grab the blades by the blade grips (1). insert them into the mouth of the device located in the front. The blades should click into place.
Check if the blades are correctly installed by pulling on the blade grips.
3. If not then remove and try again.
Knife types and uses:
Frozen food blade: It should be used for hard and frozen food. The bigger knife teeth are designed to cut through hard materials as
frozen meat. It can be used on fresh food but with limited success.
Universal blade: Should be used on other devices that are softer. For example bread, thawed / fresh meat, cooked meat. It should not be
used on frozen food.
Using the device.
1. Select the needed blade.
2. Insert the blade intot he device.
3. Check if the blade is inserted and installed correctly.
4. Put your food on a cutting board or other surface designed for cutting that will not let the food to move around.
5