Understanding Your Radio; About This Manual; How The Radio's Controls Appear In This Manual - Uniden UM525 Manual Del Usuario

Understanding Your Radio

Understanding Your Radio

About This Manual

The screen displays used in this manual are representations of what might appear when you
use your radio. Since what you see depends on the frequencies for your area and the
settings you select, you might notice some differences between what is in this manual and
what appears on your radio's display. Buttons you press appear in BOLD type, icons that
appear on the display appear in
display appears in italic type.

How The Radio's Controls Appear in This Manual

To help navigate the radio's menus, the steps shown in this manual describe the
displays you see and the keys you press or control you operate to get a desired result.
This example shows you how to use the radio's menu to program a user MMSI for the first
time. It shows you the button to press (MENU) to view a series of choices, the control to use
(PUSH/SELECT) to view and select more choices, and the correct options to select (SETUP
and USER MMSI) as you rotate PUSH/SELECT. It also instructs you to press PUSH/
SELECT to select the options.
Important: If you have already set the user MMSI, DO NOT CHANGE IT unless you have
received a new user MMSI. After you program a user MMSI for the first time, you can only
change it once more. If you try to change the user MMSI a third time, the radio will not
accept the change. To change the user MMSI again, you must return the radio to Uniden
for reprogramming.
1. Press MENU. A screen appears containing options you can select to work with the radio's
features.
2. Rotate PUSH/SELECT to select SETUP, then press PUSH/SELECT
to select it.
3. Rotate PUSH/SELECT to select USER MMSI, then press PUSH/
SELECT to select it.
If a user MMSI has already been programmed, a screen
similar to the following appears. Stop here.
If a user MMSI has already been programmed twice, a screen similar
to the following appears. Stop here.
Otherwise, if a user MMSI has not been programmed, you see the
following screen.
4. To enter the first digit of the user MMSI, rotate PUSH/SELECT until
the digit appears, then press PUSH/SELECT. The digit you entered
appears on the display and the flashing cursor moves to the next position.
Understanding Your Radio
type, and text that appears on the
BOLD REVERSED
WHAM PAGE
16
SETUP
SYSTEM
[EXIT]
SCRAMBLE
16
GROUP MMSI
USER MMSI
[EXIT]
USER MMSI
16
685749638
USER MMSI
16
685749638
CAN'T CHANGE
OVER 2 TIMES
USER MMSI
16
--------
0
9