Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROL MENU
Option
Gobo:xxx
MENU4:
Option
Option
Sound:xxx
(PRESS ENTER)
MENU5:
PassWord
PassWord
UnLock
(PRESS ENTER)
PassWord
Lock
MENU6:
Restore system default: press ENTER then fixture restore factory
Re- Def-
default and reset.
(PRESS ENTER)
MENU7:
Fixture reset: press ENTER then fixture reset.
Reset
(PRESS ENTER)
Remarks: enter into each menu, please always remember to press ENTER to save settings. Press ESC button is to go back
previous menu.
DMX MODE
This mode allows you to use universal DMX-512 console to operate.
1. Install the units in a suitable position.
2. Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For
longer cable we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit using the display or dipswitches.
4. Turn on all units. Use DMX console to control your units.
Gobo wheel reset finer adjust setting: UP/DOWN
adjust value 0-255, press enter to save.
Sound active sensitivity adjust setting: UP/DOWN
adjust value 0-255, press ENTER to save. value 0
is minimum sensitivity, 255 is maximum
Password unlock: press ENTER, UP/DOWN to
choose three-digit-password (default password is
988), press ENTER to unlock password. power on
after power off, no need password.
Password lock: press ENTER, UP/DOWN to
choose three-digit-password (lock password is
988), press ENTER to lock password. power on
after power off, need password.
8
Publicidad
