RIB SLIDER radar Manual De Instrucciones página 18

HOW TO USE THE LCD?
DISPLAY DURING NORMAL FUNCTIONING
Opening Safety
impulse
FACTORY VALUE VS. SAVED VALUE
displayed value = factory value
NAVIGATING IN MENUS
Push to enter the
LCD-menu
Scroll menu
items
CHANGING A VALUE
Scroll
menu
up-down
CHANGING A ZIP CODE
See application note on ZIP CODE
ZIP code
ZIP code
E24 1 56 KG4
01 0 800 02F
ID #
ZIP code
...
H24 1 56-KG4
01 0 800/02D
VALUE CONTROLLED WITH THE ACG9491 REMOTE CONTROL
2
Negative display = active output
Password
X X X X
current value is
Push to
displayed
select
parameter
ZIP code
E24 1 56-KG4
01 0 800/02F
ZIP code
V
By pressing the symbol of a parameter with the remote control, the display saves the
information on the LCD screen.
Do not unlock the remote control before performing this operation.
Enter password if
necessary
Not during the first
minute after power-on
of the sensor.
Select Back to
return to previous
menu or display.
more values are
Scroll
displayed
values
up-down
ZIP code
E24 1 56-KG4
01 0 800/02F
Validate the last digit in order to activate the new ZIP code:
- v = valid ZIP code, values will be changed accordingly
- x = invalid ZIP code, no values will be changed
- v/x = valid ZIP code, but from a different product.
Only available values will be changed.
To adjust contrast, push and turn
the grey button simultaneously.
During normal function only.
displayed value = saved value
Select your language before
entering the first LCD-menu.
During the first 30 seconds after
power-on of the sensor or later in the
diagnostics menu.
Select More to go to
next level:
- basic settings
- advanced settings
- diagnostics
6
new value is
Push
displayed
to save
new value
ZIP code
ZIP code
H24 1 56-KG4
H24 1 56-KG4
01 0 800/02F 01 0 800/02F
6