MTG ghost ONE Manual De Instrucciones página 12

Charging a vehicle without authen-
tication (Free charging)
No approval is required. Connect the vehicle cable and
charge: This is the default factory setting.
Prerequisites
Charge level LED (2) is lit in white.
l
Operating / error status Led (1) is lit in white.
l
If the LEDs are not lit, briefly press the button
n
(1).
1. For ghost ONE ERK version only: Plug the vehicle
cable into the socket on the wallbox.
2. Plug in the vehicle cable on the vehicle.
The charge level LED (2) initially pulses white
l
while vehicle identification is in progress.
When the charge level LED (2) is pulsing
l
green, the charging process has been started
successfully.
When charging is complete or the vehicle is
l
fully charged, the charge level LED (2) is con-
tinuously lit in green.
10
3. If an error occurs, fix the error as described in the
operating instructions.
Display
Charge level LED (2) is lit in red.
Operating / error status LED (1) is lit
in blue, yellow or red.
Connecting to the wallbox using the
web app
Follow the steps below to use the web app:
1. Keep the access letter to hand.
2. Find the list of available LAN devices on the laptop,
tablet or smartphone.
3. Select the wallbox from the list of available WLAN
devices using the WLAN code (SSID) from the
access data letter.
4. Establish a connection with the selected wallbox.
If a connection could not be established, see
Assembly and installation instructions, Com-
missioning: No connection to web app established
via WLAN section.
Error
type
Charging
error
General
error