Publicidad
Idiomas disponibles
Idiomas disponibles
1. BEFORE YOU BEGIN
1.2 Main Features
·
Easy Graphic MENU Interface
·
RS232C Port for Updating Control Software and Additional Service
·
Supports DiSEqC 1.2
·
Multi-language Function
·
Last channel Memory
·
256 Color Graphic User Interface
·
Front Panel Buttons & IR Remote Control User Interface
·
Editing Functions(TV or Radio, Group, Channel Name, PID, Parameter, Satellite name, Sort)
·
EPG for On Screen Channel Information
·
Channels Memory for Multi-satellite
·
Teletext
·
DVB Common Interface
·
Digital Audio Output S/PDIF
1.2 Accessories
·
User's Manual
·
Remote Control Unit
·
Batteries
2. CONTROLS AND FUNCTIONS
2.1 Front Panel
Power Button Turns the receiver On/Off.
Display (4-digit/7-Segment) The 4-digit displays channel information. In STAND BY mode, the 7-segment
displays local time. The red LED is the STAND BY indicator.
Remote Sensor Detects infrared signal from Remote Control Unit.
Up/Down Button Changes channels in the No-menu State and moves the cursor up/down in the Menu state.
2.2 Rear Panel
1. LNB IN (13/18V 500mA MAX) Connect the coaxial cable from LNB.
2. LNB OUT Connect to other STB.
3. SCART TV, VCR Connect the TV/VCR of TV/VCR to TV/VCR with a SCART cables.
4. AUDIO This audio sockets provide stereo audio output.
5. VIDEO (Video Output) This video jack provides a composite video output.
6. Digital Audio Output
7. RF-OUT Connect the terrestrial antenna.
8. RF-IN Connect to the TV.
9. RS 232 Connect a PC. RS 232 transfers data to the external computer (Band rate 115200)
10. Electric Inlet Lead 100~240V AC(Auto-selectable), 50~60Hz+/-5%. Make sure to check the power
specification.
11. Modulator
VHF 3-4 Selection (American Standard)
UHF 21-69 Selection (European Standard)
E - 2
ENGLISH
Publicidad
