Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
• This fire pit must be attended at all times!
• Do not operate fire pit unless it is completely
assembled and all parts are in place.
• Pay attention when operating the fire pit. It
is hot when in use and should never be left
unattended.
• Do not move it while in operation.
• Do not use this fire pit for cooking.
• Do not put any other fire pit cover or
anything flammable on, beneath or around
the fire pit.
• Never place clothing or other flammable
materials on or near the fire pit.
• Users should be alerted to the hazards of
high surface temperatures and keep a safe
distance to avoid burning or clothing ignition.
• Never lean over the open fire pit or place
hands or fingers on the upper portion of an
operational unit.
• Keep any electrical supply cords and the fuel
supply hose away from any heated surfaces.
• Combustible materials should never be within
48 inches of the top, back or sides of the
fire pit
• Do not handle the fire pit until it is
completely cooled.
• This heating appliance should not be used on
plastic or artificial wood decks.
• Children should never operate this unit.
• Children must be supervised while near this
unit.
• Children and adults should be alerted to the
hazards of high surface temperatures and
should stay away to avoid burns or clothing
ignition.
• Young children should be carefully
supervised when are in the area of the fire
pit.
• Clothing or other flammable materials
should not be hung from the fire pit or
placed on or near the fire pit.
• Any guard or other protective device
removed for servicing the fire pit shall be
replaced prior to operating the fire pit.
• Maximum safe fuel capacity: 8 lbs.
Replacement parts must be supplied directly
by manufacturer. For assistance with repair or
replacement of the burner of any other parts,
please call manufacturer at 1-877-447-4768.
Note: You must follow all steps to properly
assemble this heating item. Do NOT attempt
to assemble without proper tools.
HARDWARE
AA
Item
Item
Description
AA
AA
M6 Flange Nut (pre-
assembled on part A)
BB
BB
Wrench
Before beginning assembly of product, make
sure all parts are present. Compare parts with
package contents list and hardware contents
list. If any parts are missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 5 minutes.
Tools required for assembly (included): Wrench
5
BB
Description
M6 Flange Nut (pre-assemb
Wrench
Qty
1
1
Publicidad
