Corby Milton Manual De Instrucciones página 6

• When wall mounting the product, always check that there are no
water, gas or electrical cables/pipes within or behind the walls.
• Ensure the mains supply is switched off before commencing any
electrical installation.
• The electrical installation should be carried out in accordance with
current wiring regulations. If in doubt on any part, please seek advice
from a qualified electrician.
• Some hair dryers are double insulated and does not require an Earth
(ground) connection.
• Connection of the unit to the elctrical supply by fixed wiring should
be made with cable suitable for a 13A loading.
• When the unit is to be permanently connected to the fixed wiring, a
suitable means for all-pole disconnection (contact separation of at
least 3mm) should be incorporated (e.g. a switched fuse spur fitted
with a 13A rated fuse).
SAVE THESE INSTRUCTIONS
0 6