Lorelli PORTOFINO Instrucciones De Uso página 9

Picture 1
1. Vertical bases - 2pcs. left and right
2. Feet tube - 2pcs.
3. Seat - 1pcs
WARNING It should be installed by adult.
1. Open the supporting arm of the vertical bases as shown in Picture 2
2. Insert the vertical bases into the
3. Place the seat suspension tubes on the axes of the vertical bases. Picture 4.1. Place the fasteners in the
sequence 2; 3; 4.
4. Install the toy bar
5. The toy bar frame can be adjusted in 2 positions on front, 3 positions on back. Picture 6
1. Description of the control panel. Picture 7
1.1. Swing. There are five levels to adjust the swing speed divided by (2) and (3) buttons. Above the buttons is the
light indication (1) for the selected speed.
1.2. There are three types of time setting 8;15 and30 minutes. Press buton (5) once and light (6) will be on for 8
minutes. Press it second time, the light will be on for 15 minutes. Press it third time, the light will be on for 30
minutes. When setting time is reached, all functions will stop. If time setting function is not used, all using function
will start working until power is off .
1.3. Music button. (4). Press the button to play the music. Press the button second, third and fourth time for
volume. Next pressing will stop the music. Next pressing will start next melody.
2. Adapter (1) Picture 8 - Insert DC plug (2) of adapter to DC receiver of chair (3) . Insert the AC
plug (1) into 100-240V 50/60Hz 0.2A Max AC socket.
WARNING !!! For your own safety, please, use only the original power adapter. Input voltage ̴ AC 100 - 240 V
50/60Hz 0.2A Max / Output voltage :
incurred due to use of power adapters other than the one specified. )Do not use damaged power adapters. Do not
touch the plug of the power adapter with conductive materials, for example rings.
Do not let the child to play with the adapter or with the batteries! Keep the adapter out of the reach of children when
plugged in and has power !
Transformers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and
other parts, and in the event of such damages, they shall not be used.
The infant swing shall only be used with the recommended transformer.
3. Batteries . When using battery power, disconnect the AC adapter from the mains and unplug it from the power
socket of the product. WARNING! Otherwise, the product can not be used with battery power!
4pcs. of batteries type АА 1,5 V LR6 .
Loosen the screws on the battery cover with a screwdriver. Open the cover. Picture 9.
The battery should be placed in the battery slot with correct polarity,''+" and '' - '' !
- Loosen the screws on the battery cover with a screwdriver. Open the cover.
- Place 4 pcs. 1,5 V typ
compartment.
Tip: It is recommended the use of alkaline batteries for extended operation.
- Reinstall the battery cover and tighten the screws with a screwdriver. Do not tighten excessively.
- If the product starts with malfunction, it may be necessary to reset the electronics. Remove batteries and then
insert them again.
- When the sound begins to weaken or stop, it's time to change the battery by an adult!
WARNING! In some special conditions from the battery may leak liquids, which may cause a chemical burn or
damage the product. To avoid battery's leakage:
- Insert the batteries as indicated inside of the battery compartment.
- Non-rechargeable batteries are not to be recharged.
- Different types of batteries or new and used batteries are not to be mixed;.
- Batteries are to be inserted with the correct polarity /+ and -/.
feet tube
Picture 5.
as is shown on
SET UP AND USE
DC 5,8 V - 800 mA (The manufacturer shall not be liable for any losses
CHANGE BATTERY
e AA LR6 alkaline batteries (not included) as indicated in the inside of the battery
BATTERIES SAFETY INFORMATION
PARTS
4. Toy bar - 1pcs.
5. Adapter - 1pcs.
ASSEMBLING
until you hear a click. Picture 3
9
This product use