Richter PBI 115 Manual De Usuario página 5

over the mains supply cable as the cable could
be damaged.
Warranty Note
▪ The warranty and extended warranties are only valid if Richter
ORIGINAL spare parts, accessories and consumables are used.
▪ Repairs during the warranty period must be performed by authorized
Richter Service personnel.
The manufacturer reserves the right to make changes to the product described in
this manual at any time without prior notice.
This symbol on the product or packaging indicates that this
product must not be disposed of with normal household
waste within the EU. In order to avoid possible negative
consequences for the environment and health caused
by improper waste disposal, please recycle this product
responsibly in order to support the sustainable reuse of
materials used in the construction. To return your used
product safely, please use a designated recycling collection point or
contact the dealer from whom the product was purchased.
Get Started
Connecting the Motor Brush
Insert the telescopic tube vertically into the
PB 115 Motor Brush.
Ensure that the tube clicks audibly into
place.
Switching on the Motor Brush
Release the motor brush from the standby-
position by lightly touching the nozzle with
your foot and pulling the tube backwards.
Turn on the vacuum cleaner. Turn on the
motor brush by pressing the motor brush
symbol.
Standby-Position
The motor brush stops automatically when
the tube is tilt to vertical position. It will
automatically restart when the tube is tilted
backwards again.
Disconnecting the Motor Brush
Disconnect the motor brush by lightly
pressing down the foot pedal and pulling
out the telescopic tube.
5
EN