Buffalo 600 Serie Manual De Instrucciones página 2

EN
Safety Instructions
• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT immerse the appliance in water, or use jet/pressure
washers to clean it.
• DO NOT touch hot surfaces with bare hands. Always use the
handles/protective gloves.
• DO NOT overfill the appliance. Keep the water level below the
'MAX' level.
• DO NOT allow the water level to drop below the 'MIN' level
during operation.
• DO NOT move the appliance when it contains hot liquid.
• DO NOT use the appliance for anything other than its intended
use.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a danger or injury.
2
CU480_ML_A5_v2_20231207.indb 2 2023/12/7 18:30:18