Kettler ZERO 8 Energy Instrucciones Para El Montaje página 6

GB IRL
compatibility with the frame, prongs and other parts of the scooter.
WARNING: CHECK LOCAL LAWS REGARDING SCOOTER USE. Check local laws and
!
regulations to see where and how you may use your KETTLER scooter legally.
■ In local laws and regulations regarding laws governing helmet use and scooter operation
in your area.
■ This scooter is not a toy but a piece of sports equipment.
■ Only drive the scooter on flat, dry and even ground. Avoid driving on gravel, pebbles or
cobbled pavements.
■ Never use the scooter at dusk or night or in wet or icy conditions.
■ Avoid water, speed jumps, sand, gravel and anything else that could cause your front
wheel to stop. Bumps have the potential to stop the front wheel. When in doubt, avoid the
bumps.
■ EN14619 APPROVAL. Maximum rider weight 100kg.
■ Generally children under 13 should be supervised by an adult when driving the scooter.
■ Please assemble and fold the scooter by adult when it is used by children and preteens.
■ Damaged or worn parts must be replaced straight away and the vehicle must be with-
drawn from use until repaired. If required please only use original KETTLER spare parts.
■ Instruct children in the correct use of the product, and draw their attention to possible dan-
gers.
Assembly of the toy vehicle
CAUTION!
Ensure that your working area is free of possible sources of danger, for exam-
!
ple don't leave any tools lying around. Always dispose packaging material in such a way
that it may not cause any danger. There is always a risk of suffocation if children play
with plastic bags!
■ The toy vehicle must be assembled carefully by an adult person. Study the assembly
instructions carefully before beginning work. Assemble the vehicle in the exact sequence
shown by the letters in the diagrams. This is essential for the safe function and use of the
scooter
■ Please note that there is always a danger of injury when working with tools or doing
manual work. Therefore please be careful when assembling this machine.
Maintenance notice
■ The toy vehicle must be assembled carefully by an adult person. Study the assembly
instructions carefully before beginning work. Assemble the vehicle in the exact sequence
shown by the letters in the diagrams. This is essential for the safe function and use of the
toy vehicle.
6