ICS Schneider Messtechnik GD-20 Manual página 60

8. Dismounting, return and disposal
8. Dismounting, return and disposal
8.1 Dismounting
WARNING!
Physical injuries and damage to property and the environment through residual media
▶
EN
Before storage of the dismounted instrument (following use) wash or clean it, in order to protect
persons and the environment from exposure to residual media.
▶
Observe the information in the material safety data sheet for the corresponding medium.
When removing the instrument, the force required to do this must not be applied through the case, but only through the
spanner flats provided for this purpose and using a suitable tool (see chapter 5.1.3 "Installing the instrument").
Only disconnect the gas density sensor once the system has been depressurised!
8.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of hazardous substances (acids, bases, solutions, etc.)
and must therefore be cleaned before being returned.
WARNING!
Physical injuries and damage to property and the environment through residual media
Residual media on the dismounted gas density sensor can result in a risk to persons, the environment
and equipment.
▶
With hazardous substances, include the material safety data sheet for the corresponding medium.
▶
Clean the instrument, see chapter 7.2 "Cleaning".
When returning the instrument, use the original packaging or a suitable transport packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring instrument.
60 WIKA operating instructions gas density sensor, model GD-20