Descargar Imprimir esta página

Zealux INVERPAC S075 Manual Del Usuario Y De Servicio página 58

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

5. Allow the heat pump and the filter pump to run 24 hours a day until the desired water temperature is reached. The
heat pump will stop running at this point. After this, it will restart automatically (as long as the filter pump is running)
whenever the swimming pool water temperature drops 2 degree below the set temperature.
Depending on the initial temperature of the water in the swimming pool and the air temperature, it may take several
days to heat the water to the desired temperature. A good swimming pool cover can dramatically reduce the required
length of time.
3.7 Condensation
The air drawn into the heat pump is strongly cooled by the operation of the heat pump for heating the pool water, which
may cause condensation on the fins of the evaporator. The amount of condensation may be as much as several liters per
hour at high relative humidity. This is sometimes mistakenly regarded as a water leak.
56

Publicidad

loading