Publicidad
Idiomas disponibles
Idiomas disponibles
WIRELESS DMX
This ALGAM LIGHTING fixture is equipped with a DMX wireless transmission system. "WIRELESS DMX".
PAIRING YOUR DMX FIXTURE
1 • Connect the transmitter (Algam Lighting DMX-WT) to your DMX controller OUTPUT or turn ON the
EVENTPAR set up as transmitter.
2 • Power up transmitter and the EVENTPAR receiver.
3 • Press and hold 4 seconds on receiver button on your EVENTPAR to reset the
pairing until the status LED becomes white.(this means that receiver is now
ready to be paired).
4 • Press now on transmitter button to start pairing. Both receiver and transmit-
ter will blink rapidly (transmitter in blue color and receiver in green color). The
pairing is processing. Once pairing is done, the transmitter status LED is now
fixed blue color and receiver status LED is fixed green color.
If Transmitter or receiver looses DMX signal, the status LED will blink slowly.
ADD A FIXTURE IN AN ACTIVE GROUP
1 • Press and hold 3 seconds on receiver button on your new fixture to reset the
pairing until the status LED becomes white (this means that receiver is now
ready to be paired).
2 • Press now on transmitter button to start pairing. Both receiver and transmit-
ter will blink rapidly (transmitter in blue color and receiver in green color). The
pairing is processing. Once paring is done, the transmitter status LED is now
fixed blue color and receiver status LED is fixed green color. The other fixtures
already paired in this group with this transmitter remain paired of course.
SET UP A NEW GROUP
To set up a new group is very easy. You need one more transmitter of course. Keep the existing groups active , and start
the procedure above called « Pairing you DMX fixture».
NOTES
This DMX wireless system from Algam Lighting is not limited in number of groups and in number of fixtures connected in
a group.
DMX PROTOCOL
6 CHANNEL
CHANNEL VALUE
CH1
R dimming
CH2
G dimming
B dimming
CH3
W dimming
CH4
A dimming
CH5
CH6
UV dimming
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
FUNCTION
Red dimming - From dark to bright
Green dimming - From dark to bright
Blue dimming - From dark to bright
White dimming - From dark to bright
Amber dimming - From dark to bright
UV dimming - From dark to bright
P.23
!
The EVENTPAR fixture is auto-
matically set as «Receiver» if
the fixture is set in DMX mode
and if no DMX signal is received
by the connector «DMX IN».
The EVENTPAR fixture is auto-
matically set as «Transmitter»
if it receives a DMX signal on its
input «DMX IN» or if it is set up
in : AUTO, COLO, STAT or SOUN
mode.
Publicidad
