Publicidad
Depth
control rod
Chuck
Auxiliary
handle
1. Turn the auxiliary handle clockwise to release it. The
opening of the mount will passes freely over the chuck.
2. Insert the hammer drill head through the auxiliary
handle mount.
3. Insert the depth control rod into the mount small orifice.
4. Rotate the auxiliary handle
together with its mount until is
set in the right position to
operate the tool. The auxiliary
handle is secured when the
handle notches are attached to
the edge of the gearbox.
5. Turn the auxiliary handle
to firmly set the mount
onto the hammer
drill head.
6
ENGLISH
Impact-Rotation
selector
Rotation
direction
button
Chuck
wrench
Assembly
Depth
control rod
3
Mount
Auxiliary
handle
Parts
Speed
control
Switch
Chuck key
holder
Steps
4
5
Handle
Continuous
operation button
Power cord
protector
Power
feed cable
1 & 2
Publicidad
