Fermax MINI 1PTA WG Manual De Usuario página 17

Cod. 97864 V09_17
Set Access Mode
Programming Step
1. Enter Program Mode
2. Card access
OR
2. Card + PIN access
OR
2. Card or PIN access
OR
2. Multi cards/PINs access
3. Exit Program Mode
Reset User's
1. *(Master code) #
2. 2
3. (Master code) #
(Factory default is 123456)
Reset to Factory Default (THE USER'S INFORMATION IS STILL RETAINED)
1. Power OFF.
2. Connect GND and OPEN.
3. Power ON.
4. There will be two beeps, and the LED light turns into orange.
5. Connect GND and OPEN or must press the Exit Button for at least 10 seconds before release.
Keystroke Combination
* (Master Code) #
4 0 #
4 1 #
4 2 #(Factory default)
4 3 (2~9) #
Example: 3 (3 cards valid or 3 PINS valid)
Example: 5 (5 cards valid or 5 PINS valid)
*
7