OVERVIEW
General information
Please unpack all parts and check that everything is present
and undamaged. Do not use the product if damaged.
In this case, contact your local authorised specialist or the
service address of the manufacturer.
These operating instructions contain important information
for the first use and normal operation of this product, referred
to in the following text simply as lamp or product.
Read through the complete operating instructions carefully
before using the product for the first time. Keep these operating
instructions for future use or for future users' reference.
Failure to follow the operating instructions and safety instructions
may result in damage to the product and hazards
(injuries) for the operator and other persons.
The operating instructions refer to applicable standards
and regulations of the European Union. Please also adhere
to the laws and guidelines specific to your country.
Symbols in this manual
Please take note of the following symbols and words used
in the operating instructions, on the product and on the
packaging:
Warning
Attention – Danger!
May result in serious injury or death
Information
Useful additional information about the product
GENERAL INFORMATION
Product description
a
COB-LED
b
SMD LED
c
Sensor active LED
d
Sensor
e
Sensor button
f
Functions button
g
USB charge socket with rubber cover + Status LED display
h
Swivel mount
Liability disclaimer
The information contained within these operating instructions
can be changed without prior notification. We accept
no liability for direct, indirect, incidental or other damage or
consequential damage arising though improper handling/
use or through disregard of the information contained within these
operating instructions.
Proper intended use
The product serves as a mobile light source and is not intended
for use in other applications. The product is not suitable
for household room lighting and only for use as described in
the operating instructions. Use outside that stipulated in the
information is improper use and this can result in damage to
property or personal injury. We accept no liability for damage
caused by incorrect or improper use.
EN
11