Waterdrop WD-FC-06 Instrucciones De Instalación página 4

Take out the filter (A) and remove the package.
Take out the system and adapters (A3/B2) and twist off the filter base (D)
anticlockwise.Keep the water outlet hole of the filter downward and put the filter
on the filter base (D).Twist on the filter base (D) clockwise.
Remove the aerator of the faucet and choose the right adapter to match your
faucet threading. Make sure the washer between the faucet and the system is
installed firmly.
For external threaded faucets,
please connect the mounting
base (C) directly to the faucet.
If you still cannot connect it properly, please contact customer service to get
another adapter.
Installation Instructions
Figure 1.1
How to Choose the Right Adapter
For internal threaded faucets, select the appropriate
adapter (A3/B2) according to the thread size. Use a
coin to connect it to the faucet. Then connect the
mounting base (C) to the adapter.
[Figure 1.1]