Publicidad
Idiomas disponibles
Idiomas disponibles
plug for damage before you plug it in.
■
Never bring the light into contact with water or
other liquids.
■
Never open up any of the electrical equipment
or insert any objects into electrical parts, as this
carries a risk of death from electric shock.
■
When plugging the AC adapter into the power
supply or unplugging it, make sure you only
touch the insulated parts.
■
The external flexible cable for this light cannot
be replaced; if this cable becomes damaged,
the light can no longer by used and must be
disposed of.
■
Before using the light, make sure that the
supply voltage matches the required operating
voltage for the light (220–240 V~, 50/60 Hz).
■
Always take the plug out of the socket before
cleaning or if you are not using the light for a
long period. The light source for this light may
only be replaced by the manufacturer, a service
technician authorised by the manufacturer, or a
person with equivalent qualifications.
Avoid fire and injury
CAUTION: HOT SURFACES
■
– RISK OF BURNING
burns, make sure that the light is
switched off and has cooled down before you
touch it. Lamps can get very hot.
■
Do not cover the lamp with any other objects.
Overheating can cause fire.
■
Set up the light somewhere where it is protected
from damp and dirt.
■
Do not hang any extra objects (e.g. clothing)
on the product.
■
Always set up the product on a stable, level
surface.
■
Do not wrap the power cable around the
product. Do not carry or pull the product by its
power cable.
■
Do not leave the light unattended while it is on.
22 GB/IE
Overheating can cause fire.
■
When positioning the power cable, make sure
it does not create a trip hazard.
■
Do not look directly into the light source (light
bulb, LED, etc.). Do not look at the light source
(light bulb, LED, etc.) through an optical
instrument such as a magnifying glass.
First use
Setting up the product
□
Take the LED table lamp
the packaging and remove all the packaging
material.
□
Make sure that the power cable does not pres-
ent a trip hazard.
□
Plug the AC adapter
meets the regulations.
Your product is now ready for use.
Switching the product on and off
□
Switch the product on and off using the on/off
switch
To avoid
Maintenance and cleaning
WARNING: ELECTRIC SHOCK
Before cleaning, always remove the plug
WARNING: ELECTRIC SHOCK For
reasons of electrical safety, the light must
never be cleaned using aggressive
cleaning agents or immersed in water.
CAUTION: HOT SURFACES – RISK
OF BURNING Let the light cool down
completely.
□
Never use solvents, petrol, etc. These can
damage the light.
□
Always use a dry, lint-free cloth for cleaning.
This LED lamp is not dimmable.
carefully out of
1
into a socket that
3
.
2
from the socket.
3
Publicidad
